What are the precautions for sheet metal processing?
Many work industries require sheet metal processing operations. This work contains many contents, such as machining processes such as blanking and material bending. In the process of these machining procedures, operators must pay attention to whether the parameters are Accurate, and whether the application method meets the standard requirements. At present, the workplace also pays great attention to the processing quality of materials. Therefore, in the process of carrying out this processing operation, attention should also be paid to the application of technical skill knowledge, so as to meet the development needs of the industry. Below, we will give you a brief introduction to the attention of this processing work by our sheet metal processing professional manufacturers.
When performing sheet metal processing on materials, care should be taken to minimize energy consumption. Although for an operational task, reducing the amount of material input does not have much impact on cost recovery, so for long-term large quantities of processing, if By reducing input and loss as the main purpose, it can reduce more expenses for manufacturers and bring more economic benefits to manufacturers.
During the processing of sheet metal, in order to achieve the goal of reducing the investment, the staff needs to strictly follow the production specifications to complete the work process. Before each processing, the application of the material needs to be reviewed. Process it casually. The waste generated by many processing industries is because the materials are not determined before processing, so the staff must first specify the type of materials to be processed, and check the specifications and models of the materials. The preparatory work can avoid mistakes during processing. It is also possible to reduce the amount of waste, and the staff should pay attention to these problems when processing.
In addition to the above, we should also pay attention to the following points
1. In order to avoid chipping and injuring people, the baffle should be installed in the proper orientation.
2. When you need to use gauze to polish the appearance of the workpiece, you should move the tool to a safe position, and be careful not to let the hand and clothes touch the appearance of the workpiece. When grinding the inner hole, do not support the gauze with your fingers. Use a wooden stick instead, and the speed should not be too fast.
3. Stop placing objects, fixtures or workpieces on the lathe bed and on the spindle gearbox. Think about gathering when you work. Stop fatigue, chat, multiplayer, drink, and smoke.
4. Adhere to the neatness of the machine tools, things, and work, and do a good job of handover. When you are off duty, you should turn off the power and put the various handles in a safe place.
5. When turning irregularly shaped workpieces, load the balance block and cut it after trial transfer.
6. The tool holder should be reliable. The protruding part of the tool head should not exceed 1.5 times the height of the tool body. The shape and dimension of the tool under the tool should be consistent with the shape and scale of the tool body. The gasket should be as small as possible.
7. In addition to the gage on the lathe that can be measured automatically during operation, the car should be parked and the tool holder moved to a safe position before measuring the workpiece.
8. The strip-shaped chips generated during cutting and the long spiral-shaped chips should be removed in time by using hooks to stop the hand.
9. Wear work clothes before work, tie the cuffs, wear protective glasses, women workers should wear a working cap, and long-term release in the hair care cap to stop wearing gloves.
10. Loading and unloading the chuck on the lathe spindle must be carried out after stopping. Do not use the force of the motor to remove the chuck.
11. The chuck that holds the workpiece, the dial, and the protruding part of the heart clip are preferably used with a protective cover to avoid twisting the clothes and other parts of the body. If there is no protective cover, please pay attention to a certain interval during operation.
12. When clamping the workpiece with the tip, it should be noted that the center of the tip should be exactly the same as the center hole of the spindle. Do not use the damaged or skewed tip. Before use, wipe the tip and center hole clean. The tip of the tailstock should be firmly fixed.
13. When turning slender workpieces, in order to ensure safe operation and processing quality, the tool holder or center frame should be used. For the machining part beyond the scale of the lathe, a mobile protective cover and safety signs should be provided.
